Adjusting The Rear Deflector (Fluffer Shield); Adjusting The Swath Baffle - MacDon R85 Operator's Manual

Rotary disc 16-foot self-propelled windrower header
Table of Contents

Advertisement

6.5.2 Adjusting the Rear Deflector (Fluffer Shield)
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
The rear deflector (fluffer shield) slows the crop exiting the conditioner rolls, directs the flow downward, and fluffs
the material.
Adjust the rear deflector as follows:
1. For more crop control in light material, lower the
deflector (A) by pushing down on one side of the
deflector and then on the other side.
NOTE:
Locking handles (B) are located at both ends of
the deflector and may be loosened slightly.
2. For heavier crops, raise the deflector by pulling up on
one side and then on the other side.
NOTE:
For even windrow formation, be sure the
deflector (A) is not twisted.
3. Tighten handles (B) to secure deflector position.
6.5.3 Adjusting the Swath Baffle
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
169457
OPERATING THE HEADER
Figure 6.14: Forming Shield
75
Revision G

Advertisement

Table of Contents
loading

Table of Contents