Navigating From Point To Point Within A Data File; Moving To A Specific Position Within A Data File - GE MFE DMS 2 Operating Manual

5.2.2 Navigating from Point to Point Within a Data
File
At any time, one or more presses of
display to the DR Navigation (NAV) Mode, with the cursor in
the window as shown in Figure 5-5. This allows the user to
navigate throughout the active data file to select any point
(whether it contains a thickness measurement or is empty).
The fastest method for moving within the NAV window is
accomplished by selecting SPREAD VIEW and pressing
or the as shown in Figure 5-5. While navigating,
the active data point is highlighted by a bold rectangular box. If
the user exits the DR Mode, to either the TG, DR, or Test
modes, the selected file and point remain active. To view
comments and attachment flags, select LIST VIEW and press
to scroll through data points.
5.2.3

Moving to a Specific Position Within a Data File

Specific positions in a data file be reached quickly and
directly, by working in the RECORD Submenu. A Row,
DMS 2 Operating Manual
will switch the
FIGURE 5-5—File Navigation Mode with SPREAD VIEW
selected.
5. Working with Stored Data
Page 145