Storing Minimum Of B-Scan In Data Recorder Files; Navigating Through Data Recorder Files - GE DM5E Operating Manual

5.3.1 Storing Minimum of B-Scan in Data Recorder Files

When in B-Scan mode, the minimum value is stored in the active position of the Data Recorder by pressing

5.3.2 Navigating Through Data Recorder Files

When the Data Recorder is turned ON, the contents of the active Data Recorder file are displayed in the File Navigation Grid shown in
Figure 20 on page 48. After the navigation grid is activated,
box appears around the selected file position. Once a file position has been selected:
•
The current thickness reading can be sent to an EMPTY file position.
•
A measurement value can be stored by pressing
•
A previously-stored value can be overwritten by pressing
DM5E Operating Manual
, , and
below SEND.
below SEND.
Chapter 5. Using the Optional Data Recorder
can be used to select any file position. A heavier grid
below SEND.
51