GE MFE DMS 2 Operating Manual page 36

When the DMS 2 is powered on, or when
instrument is in TG mode and the TG Primary Menu is dis-
played. The display will look like the TG Mode display shown in
Figure 2-1. The TG Primary Menu contains five submenus that
will be listed in the menu bar near the bottom of the display
screen. As shown in Figure 2-2, the submenus for the TG
Primary Menu are as follows:
• TGMODE
• ALARM
• A-GATE
• B-SCAN (DMS 2 only) or B-GATE
• PARAM
To access any one of these submenus, push
the desired submenu title is highlighted. As you move from
submenu to submenu with the
DMS 2 Operating Manual
2. Understanding the DMS 2 Keyboard, Menu Systems, and Displays
is pushed, the
or until
or keys, you'll notice
that the selections listed in the five boxes across the bottom of
the display change to match the submenu. When the desired
submenu is indicated, its selections will appear in the boxes
across the bottom of the DMS 2 screen. You can then directly
adjust any selection you wish by pressing the
positioned directly below that selection. It's important to note
that the last choice or value that appears in the selection box
before the submenu is changed will be its new value.
Figures 2-2, 2-3, 2-4, and 2-5 show the menu structures. The
figures explain the primary function of each submenu (and
each selection) contained in the menu. Use these figures as
guides to quickly find the proper method to access the
instrument's many features. You'll also find operation manual
section references that tell you where to turn in this manual for
more specific information on each feature.
key that's
Page 25