Recommended Probes For The D-Multi Mode - GE MFE DMS 2 Operating Manual

7. Specifications
7.2.3

Recommended probes for the D-Multi Mode

Model Designation
HT400A/400 High Temperature
KBA560-D General Purpose
DA301 General Purpose
DA312 Thin Materials
DP-104 High Penetration
DM-401-GP General Purpose
Note: Other probes listed in the D-Multi Mode probe parameter in the TG Setup Menu are compatible
over a limited thickness range.
NOTE: Probe specifications are subject to change without notice.
Page 178
Nominal Contact
Frequency Diameter
5 MHz .500"
(12.7mm)
5 MHz .625"
(15.9mm)
5 MHz .475"
(12.1mm)
10 MHz .300"
(7.6mm)
1 MHz 1.25"
(31.8mm)
5 MHz .700"
(17.8mm)
Temperature Measuring Range
Range in Steel
<1000°F .100"-2.000"
(<538°C) (2.5-50mm)
<450°F .100"-2.000"
(<230°C) (2.5-50mm)
<140°F .070"-1.800"
(<60°C) (1.8-46mm)
<130°F .030"-.900"
°
(<54 C) (.8-23mm)
<130°F .100"-.2000"
(<54°C) (2.5-50mm)
<300°F .060"-8.00"
(<150°C) (1.5-200mm)
DMS 2 Operating Manual