Adjusting The Data Recorder (Nav Window) Display - GE MFE DMS 2 Operating Manual

5. Working with Stored Data
5.2.6 Adjusting the Data Recorder (NAV Window)
Display
Step 1: Open the Data Recorder Menu by pushing
Step 2: Activate the RECORD Submenu by selecting it with
or so that it's highlighted.
Step 3: To modify the appearance of the DR display, press
below the VIEW selection. You'll notice two options (as
shown in Figure 5-9):
FIGURE 5-9—The two different NAV Window options. Note also the list of all FLAG values.
Page 154
SPREAD – Displays 12 data points and the names of Rows,
Columns, Elevations, or Locations
LIST – Displays only 4 data points but includes a summary
.
of the COMMENT letters and FLAGS attached to each data
point. Flags include A-scan, B-scan, Micro-Grids and limit
violations.
Step 4: Note that FILE NAVIGATION works in either VIEW
selection. However, it's easier and faster in SPREAD VIEW
using and or .
DMS 2 Operating Manual