Mitsubishi Pajero Pinin 1999 Workshop Manual page 917

55-34
HEATER, AIR CONDITIONER AND VENTILATION
VENTILATORS
Caution: SRS
When removing and installing the floor console assembly from vehicles equipped with SRS, do
not let it bump against the SRS-ECU or the components.
Rear heater duct B removal steps
Front scuff plate, cowl side trim and
center console assembly (Refer to
GROUP 52A ± Instrument Panel.)
Floor console assembly
(Refer to GROUP 52A.)
Front seat
(Refer to GROUP 52A.)
Floor carpet
1. Under cover
2. Rear heater duct B
Defroster nozzle and distribution
duct removal steps
Instrument panel
(Refer to GROUP 52A.)
3. Defroster nozzle assembly
4. Distribution duct assembly
3
4
6
5
2
±
Ventilators
Foot distribution duct and rear heater
duct A removal steps
Floor console assembly
(Refer to GROUP 52A.)
Instrument panel assembly
(Refer to GROUP 52A.)
Blower motor
(Refer to P.55-25.)
5. Rear heater duct A
6. Foot distribution duct
NOTE
For the center air outlet assembly and the side air outlet
assembly, refer to GROUP 52A ± Instrument panel.
6
5
1