Mitsubishi Pajero Pinin 1999 Workshop Manual page 527

35B-28
1
5
ABS <4WD> ±
Hydraulic Unit and ABS-ECU
A B
Caution
1. The hydraulic unit assembly is heavy, and so care
2. The hydraulic unit assembly is not to be disassembled;
3. The hydraulic unit assembly must not be dropped
4. The hydraulic unit assembly must not be turned upside
INSTALLATION SERVICE POINT
2
6
Connect the pipes to the hydraulic unit assembly as shown
3
in the illustration.
1. To the proportioning valve (Rear brake, LH)
2. To the proportioning valve (Rear brake, RH)
4
3. From the master cylinder (Primary)
4. From the master cylinder (Secondary)
5. To the front brake (RH)
6. To the front brake (LH)
HYDRAULIC UNIT AND ABS-ECU REMOVAL
should be taken when removing it.
its nuts and bolts should absolutely not be loosened.
or otherwise subjected to impact shocks.
down or laid on its side.
A A BRAKE PIPE CONNECTION