Injector Driver - Mitsubishi Pajero Pinin 1999 Workshop Manual

13A-116

INJECTOR DRIVER

REMOVAL AND INSTALLATION
5 Nm
1
5 Nm
Removal steps
A A
1. Injector driver
2. Bracket
GDI ±
2
REMOVAL SERVICE POINT
Lock
A A
Press the injector driver connector in the place shown in the
illustration to disconnect the injector driver connector.
Caution
1. Disconnect the battery (±) cable from its terminal
2. High-tension current is flowing in the harness between
Injector Driver
INJECTOR DRIVER REMOVAL
before carrying out this operation.
the injector driver and the injector while engine is
running, and the injector driver will become hot after
the vehicle has been driven, so take care when
handling it.