Mitsubishi Pajero Pinin 1999 Workshop Manual page 492

REAR DISC BRAKE
REMOVAL AND INSTALLATION
Pre-removal Operation
D
Brake Fluid Draining
55 ± 65 Nm
Removal steps
1. Brake hose connection
A A 2. Disc brake assembly
3. Brake disc
BASIC BRAKE SYSTEM ±
3
INSTALLATION SERVICE POINT
A A DISC BRAKE ASSEMBLY INSTALLATION
1. In order to measure the brake drag force after pad
2. Install the caliper support to the backing plate, and then
Rear Disc Brake
Post-installation Operation
D
Brake Fluid Supplying and Air Bleeding (Refer to
P.35A-10.)
1
15 Nm
installation, use a spring balance to measure the
rotary-sliding resistance of the hub with the pads removed.
assemble the pad clip and the pad to the caliper support.
Caution
Do not contaminate the friction surfaces of the pads
and brake discs by any oil or grease.
2
35A-25