STEERING ±
MB990635,
MB991113 or
Cord
MB991406
Nut
Ball joint
Mating marks
Hose clip
Return tube
Return hose
Power Steering Gear Box and Linkage
REMOVAL SERVICE POINTS
A A
TIE ROD END AND KNUCKLE DISCONNECTION
Caution
(1) In order not to damage the ball joint thread, the tie
rod end mounting nut must be only loosened but not
removed from the ball joint. Be sure to use the special
tool.
(2) Tie the special tool with a cord so as not to fall off.
A B
STEERING GEAR BOX AND LINKAGE REMOVAL
Caution
Do not damage the boots when removing the steering
gear box and linkage.
INSTALLATION SERVICE POINTS
A A PRESSURE HOSE CONNECTION
Connect the pressure hose and pressure tube with their mating
marks aligned.
B A RETURN HOSE CONNECTION
Connect the return hose so that the claws of the hose clip
are positioned as shown.
37A-17