Mitsubishi Pajero Pinin 1999 Workshop Manual page 83

GDI ±
Troubleshooting
Throttle valve position feedback
Throttle valve control servo motor (1st motor)
Throttle valve control servo motor (2nd motor)
Communication line system with throttle valve controller
Engine-ECU
NOTE
When the electronic-controlled throttle valve system is stopped,
the engine warning lamp flashes.
METHOD OF READING AND ERASING DIAGNOSIS
CODES
Refer to GROUP 00 ± How to Use Troubleshooting/Inspection
Service Points.
INSPECTION USING MUT- II DATA LIST AND
ACTUATOR TESTING
1. Carry out inspection by means of the data list and the
actuator test function.
If there is an abnormality, check and repair the chassis
harnesses and components.
2. After repairing, re-check using the MUT- II and check that
the abnormal input and output have returned to normal
as a result of the repairs.
3. Erase the diagnosis code memory.
4. Remove the MUT- II .
5. Start the engine again and carry out a road test to confirm
that the problem has disappeared.
13A-11