[Source:]Voltage[:Over]:Protection:delay <Nrf; [Source:]Voltage[:Over]:Protection:state <Bool - ITech IT-M3200 Programming Manual

Programmable dc power supply

Table of Contents

Arguments

<NRf+> MIN TO MAX

Default value

MAX

Example

VOLT:PROT 600.00

Query command

[SOURce:]VOLTage[:OVER]:PROTection[:LEVel]? [MINimum|MAXimum]

Returns

NR3

[SOURce:]VOLTage[:OVER]:PROTection:DELay

<NRf+>

This command sets the over-voltage delay time of the power supply.

Syntax

[SOURce:]VOLTage[:OVER]:PROTection:DELay <NRf+>

Arguments

<0.00-10.00>

Default value

10.00S

Example

VOLT:PROT:DEL 10.00

Query command

[SOURce:]VOLTage[:OVER]:PROTection:DELay? [MINimum|MAXimum]

Returns

NR3

[SOURce:]VOLTage[:OVER]:PROTection:STATe

<bool>

This command enables or disables the over-voltage function.

Source Commands

Table of Contents

Need help?

Do you have a question about the IT-M3200 and is the answer not in the manual?