How To Install The 5-Inch Internal Device - Fujitsu PRIMERGY TX200 S2 User Manual

[SCSI Ctrl U160(PG-128)]
SCSI Ctrl U160(PG-128)
SCSI connector B

7.7.3 How to Install the 5-inch Internal Device

Perform the following procedures to install a 5-inch internal device. When installing the internal hard
disk unit conversion kit the procedures vary. Refer to"7.7.4 How to Install the Internal Hard Disk Unit
Bay Conversion Kit" ( pg.220).
1
Set SCSI IDs of the 5-inch internal devices.
For SCSI IDs of devices, refer to "
2
Turn off the server and connected devices, and unplug all power cables from
the outlet.
3
Remove the side and front covers.
"7.2 Removing and Attaching Covers" (pg.176)
4
Touch a metal part of the server to discharge static electricity.
Terminal resistor
Secondary
IDE connector
SCSI connector A
■
Installable 5-inch Internal Devices" ( pg.215).
PRIMERGY TX200 S2 User's Guide
7
217