7.7.2 Installable Internal Backup Devices
The following internal backup devices can be installed.
For details about the internal backup device, see the manual supplied with the internal backup device.
Product name
Internal DAT72 unit (with drive cage)
Internal backup devices do not support hot swap, hot plug.
■ Example
SCSI card (PG-1301L)
SCSI card (PG-1281) is required with basic card slot conversion kit.
7.7.3 How to Install an Internal Backup Device
1
Turn off the power to the server and all peripheral devices and remove the top
cover.
"7.2 Installing/Removing the Top Cover" (pg.182)
2
Touch a metal part of the server to discharge static electricity.
table: List of internal backup devices
Model
PG-DT503D
Internal hard disk units
SAS connector
PRIMERGY RX300 S3 User's Guide
Remarks
Incl. an internal SCSI cable
Internal DAT72 unit
SCSI cable
(attached to internal DAT72 unit)
7
209