Fujitsu PRIMERGY TX200 S2 User Manual page 252

Chapter 8 Configuring Hardware and Utilities
3
Operations on the submenu are the same as those on the [Main] menu.
Use the [↑] [↓] [←] [→] keys to select the item whose setting is to be changed. Press the [Enter]
key.
The setting to be changed is displayed.
For the setting to be changed, use the [↓] [↑] or [+] [–] keys to change the setting and press the
[Enter] key.
●
Roles of Keys
Key
[↑] [↓] [←] [→]
[Home / End]
[+] [–]
[Enter]
[Esc]
[F2]
■ How to Exit the SCSI Setup Utility
1
Press the [Esc] key from the [Main] menu.
The [Exit] menu window appears.
2
Select the operation and press the [Enter] key.
To save configuration changes before exiting:
Select [Save Changes then exit this menu] and press the [Enter] key.
The changes are saved and the SCSI Setup Utility closes.
To exit without saving configuration changes:
Select [Discard changes then exit this menu] and press the [Enter] key.
The changes are discarded and the SCSI Setup Utility closes.
252
table: List of Key Operations on the SCSI Setup Utility Window
Moves the cursor.
Changes the setting value of an item.
Selects an item. When the item has a submenu, the submenu is displayed.
Returns to the previous menu.
Pressing this key on the SCSI Setup Utility initial screen exits the SCSI
Setup Utility.
Pressing this key from the [Main] menu moves the cursor to [Boot Adapter
List] or [Global Properties].
Roles of key