Fujitsu PRIMERGY TX200 S2 User Manual page 239

table: Items on the Peripheral Configuration Submenu
Item
Parallel Mode
Diskette Controller
Floppy Type Local (Fixed parameter)
Local Bus IDE adapter Both (Fixed parameter)
Mouse Controller
SCSI Controller Channel A & B (Fixed
parameter)
SCSI Option ROM Scan
LAN Controller Enabled (Fixed parameter)
LAN Remote Boot
Setting
• Printer
• Bidirection (at the time of
purchase)
• EPP
• ECP
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled
• Auto Detect (at the time
of purchase)
• Disabled
• Enabled (at the time of
purchase)
• Disabled (at the time of
purchase)
• PXE
PRIMERGY TX200 S2 User's Guide
Description
Sets the data transfer mode of the parallel port.
Configures the floppy disk controller.
Sets the type of floppy disk to be used.
When using the server's floppy disk unit, set to
[Local].
When using a remote floppy disk drive or floppy
disk image, set to [Remote] or [Remote Once].
Sets whether or not to use the IDE adapter.
Sets whether or not to use the mouse connected to
the mouse port.
Sets whether to enable or disable the onboard SCSI
controller.
Sets whether or not to initialize the extended ROM.
Sets whether to enable or disable the onboard LAN
controller.
Sets whether or not to perform a network boot.
This function allows booting the server via the
network. It is used for remote installation of the OS,
etc.
8
239