Fujitsu PRIMERGY TX200 S2 User Manual page 242

Chapter 8 Configuring Hardware and Utilities
Item
NX Memory Protection
CPU MC Status Clear
Enhanced SpeedStep
CPU Clock Throttling Delay
USB Host Controller
USB 2.0 Host Controller
USB BIOS Legacy Support
242
table: Items on the Advanced System Configuration Submenu
Setting
Disabled (Fixed
parameter)
Next Boot (Fixed
parameter)
Disabled (Fixed
parameter)
No Delay (Fixed
parameter)
• Disabled
• Enabled (at the time of
purchase)
• Disabled
• Enabled (at the time of
purchase)
• Disabled (at the time of
purchase)
• Enabled
Description
Configures the CPU internal setting.
Configures the CPU internal setting.
Configures the CPU internal setting. This item is
displayed only when using the optional 3.6GHz
CPU.
Sets the time delay after which the CPU moves to
throttling when it overheats.
Sets whether or not to use the USB host controller.
Sets whether to enable or disable the USB 2.0 host
controller.
Sets whether to enable or disable the USB connected
devices also in a DOS environment.
This item cannot be selected when [USB Host
Controller] is set to [Disabled].