Fujitsu PRIMERGY TX200 S2 User Manual page 218

Chapter 7 Installing Hardware Options
5
Remove the dummy unit.
Pull the dummy unit out slowly towards you, keeping the tabs on the 5-inch storage bay rails (on
both sides) pressed inward.
Tabs
6
Detach the 5-inch storage bay rails from the removed dummy unit.
Remove eight screws that fix the 5-inch storage bay rails to detach.
Inch thread
7
Attach the removed 5-inch storage bay rails to the internal device to be added.
Of the eight screws removed from the dummy unit when the 5-inch storage bay rails were
detached, use four metric threads to install the internal device.
218
Be sure to keep the removed dummy units for later use.
Metric thread
Inch thread
Metric thread