Table of Contents
Advertisement
Tools:
11mm, 13mm, 16mm wrench/deep well socket
•
7mm, 12mm, 13mm open-ended wrench
•
2.5mm, 4mm, 5mm, 6mm, 8mm Allen wrench
•
#2 Phillips screwdriver
•
(optional) Two adjustable wrenches
•
(A)
Unpacking
Carefully inspect the carton and trap machine to be sure that damage hasn't
1.
occurred during shipping. Report any damage found immediately to the
shipper.
Carefully remove trap assembly and all other components from the cardboard
2.
shipping box and other smaller boxes. Remove all hardware from bags.
Check that all parts were included. Call the CHAMPION Customer Service
3.
Department at (800) 533-5000 to obtain replacement parts if any parts are missing.
If the trap needs to be returned for service or replacement, save all packing
4.
material and box for reuse.
III. Tools Required for Assembly
IV. Assembly and Installation
7
Advertisement
Table of Contents
