Table of Contents
Advertisement
Features and Descriptions
Wireless Receiver
Remote Learn Button
A)
Initiates pairing (programming) of
•
Receiver and Wireless Remote Transmitter.
Remote Learn Light
B)
Flashes slowly to indicate the
•
receiver is ready to learn the Wireless
Remote Transmitter.
Flashes rapidly three times the s the hen
•
receiver has learned the Wireless Remote
Transmitter to confirm the received signal.
Receiver Status the Light
C)
When the LED is green, the receiver is
•
powered on and will accept a signal
from the remote.
As soon as a signal is received, the
•
status will turn red until the trap fires.
Once the trap is fired, the light will turn
•
back to green.
Remove Antenna
D)
An antenna must be attached for
•
proper operation.
Throw Delay
E)
Adjusts the length of delay (range 0-15
•
seconds) for the trap to fire after the
receiver receives a signal from the
Wireless Remote Transmitter.
12V Power Connector and Output Connector
F)
Allows the user to attach the
•
receiver quickly and easily to the
trap.
Wireless Remote Transmitter
Transmitter Button (Throw Button)
G)
Pressing this button will transmit the
•
command to activate the output to any
Receiver which has learned the Wireless
Remote Transmitter and is within range of the
Transmitter.
Signal Light
H)
Illuminates whether n signal is being transmitted.
•
Battery Compartment Cover
I)
Remove to install/replace the A23 battery.
•
55
C
Advertisement
Table of Contents
