Assembly (cont.)
(C)
14. Main Body U-Bracket Assembly
A. Place the Main Body U-Bracket (UB1) on top of the Cart Top Support Bracket (C1), then line the UB1 bracket
up with the four bolt holes on top of the C1. See figure 11.
B. Ensure the welded nut on the Main Body U-Bracket (UB1) is on the backside towards the handle. See figure 11.
C. Assemble and tighten the four bolts (B10), eight washers (W1), and four nuts (N1) in the four holes of the Main
Body U-Bracket (UB1). Install one washer on each side of the bolt (B10). Use a wrench/socket.
Welded Nut
Figure 11
23