Table of Contents
Advertisement
Assembly (cont.)
(C)
22. Safety Tube Support
A. Install the safety tube supports (A2) by tightening two button head screws (A3) on each side of the Trap Body
Assembly (TB1). The four holes are located on the Trap Body Assembly (TB1) front, as shown in figure 19.
A2
A3
Figure 19
WARNING: FAILURE TO KEEP HANDS AND BODY OUTSIDE THE THROWING
ARM PATH INDICATOR AREA CAN RESULT IN SERIOUS INJURY OR DEATH FROM
BEING STRUCK BY THE THROWING ARM DURING USE.
CAUTION: DO NOT LIFT TRAP BY THROWING ARM PATH INDICATOR TUBING OR
THROWING ARM PATH INDICATOR TUBE SUPPORTS; THESE WERE NOT DESIGNED
TO BE A LIFTING POINT
31
Advertisement
Table of Contents
