90mm Midi Conversion Assembly
(D)
6. 90mm Midi Top Plate Assembly.
A. Install the 90mm Midi Top Plate (M2) using the same 4 Magazine Rods (M5) by tightening the 4 Button Head
Screws, as shown in figure 36. Use #2 Phillips screwdriver.
7. Install the 90mm Midi Magazine
A. Install the 4 Magazine Rods (M5) over the two front Magazine Studs (MA5) and the two magazine studs on the
Midi Adapter (MA1). The open end of the 90mm Midi Top Plate (M2) is faced toward the rear of the trap, as
shown in figure 37.
Figure 36
Figure 37
40