Table of Contents
Advertisement
90mm Midi Conversion Assembly
(D)
4. Midi Adapter Assembly
A. Secure the Midi Adapter with Magazine Studs (MA1) to the Trap Body Assembly (TB1) using the 3 Button Head
Screws (MA3) and Washers (MA4), as shown in figure 34. Use a #2 Phillips Screwdriver.
MA1
Figure 34
5. Remove Standard 110mm Magazine Top Plate
A. Remove the Standard 110mm Magazine Top Plate (M1) from the 4 Magazine Rods (M5) by loosening the 4
Button Head Screws, as shown in figure 35. Use #2 Phillips screwdriver.
Figure 35
MA5
39
Advertisement
Table of Contents
