Attach Trap To Frame - Champion Freedom Bird Instruction Manual

Assembly (cont.)
(C)
16. Trap Body Assembly to Cart Assembly
A. Having another person for this step will make it much easier.
B. Attach the Trap Body Assembly (TB1) to the Cart Assembly using a shoulder bolt (B3) and a washer (W2), as
shown in figure 13. The shoulder bolt (B3) and washer (W2) go in the rear hole, as shown in figure 13. Use an
8mm Allen wrench.
C. Repeat step B on the opposite side with another shoulder bolt (B3) and washer (W2).
Figure 13
TB1
25