Table of Contents
Advertisement
Distance Adjustment
(C)
WARNING: BEFORE MAKING ANY ADJUSTMENTS, MAKE SURE THE THROWING
ARM IS IN THE UNCOCKED POSITION, THE ON/OFF/SAFE RELEASE SWITCH IS
IN THE "OFF" POSITION, AND THE BATTERY IS DISCONNECTED FROM THE
TRAP. THIS TRAP IS CAPABLE OF THROWING TARGETS A DISTANCE OF UP TO
90 YARDS. USE ONLY IN AREAS WHERE THERE IS NO RISK OF INJURY TO
ANOTHER PERSON OR CAUSING OTHER DAMAGE.
WARNING: DO NOT MANUALLY FORCE THE THROWING ARM THROUGH THE
UNCOCKED POSITION AS THE MAINSPRING WILL TAKE OVER AND FIRE THE
TRAP, POTENTIALLY CAUSING SERIOUS INJURY OR DEATH.
To adjust the tension of the mainspring, follow these steps for max tension or un-cocked position.
1.
Put the Freedom Bird into the zero-degree elevation setting. Remove the Handle (H1) from
the Cart Handle Support Bracket (C2) by unthreading the Hand Nut(S1). Place the Handle
(H1) between the Handle Support U-Bracket (HB2) and the back of the trap. See figure
(39). The hook should be on both sides of the mainspring bolt and latched on the pivot stud
of the mainspring bolt, as shown in figure (39).
Figure 39
46
Advertisement
Table of Contents
