Table of Contents
Advertisement
Assembly
(C)
CAUTION: PROVIDE AMPLE CLEARANCE AROUND THE TRAP.
DO NOT OPERATE THE TRAP IN AN AREA THAT DOES NOT ALLOW SAFE (REAR)
ACCESS TO THE TRAP AND THE ON/OFF/SAFE RELEASE SWITCH DURING
LOADING AND USE.
1. Cart Assembly
A. The cart axel needs to be on the inside, as shown in figure 1.
B. The four center holes on the cart top support (C1) must be positioned towards the rear of the cart, away
from the axel, as shown in figure 1.
4 holes positioned to right
Figure 1
14
Advertisement
Table of Contents
