Table of Contents
Advertisement
Safety
Do not stand in front of the trap when it is in the cocked position. Accidental release of the
•
target and throwing arm can cause serious injury or death!
Before installing the Wireless Receiver on the trap, make sure that the throwing arm is in
•
the uncocked position, the trap is in the off position and the trap is disconnected from the
battery.
WARNING: DO NOT MANUALLY FORCE THE THROWING ARM THROUGH THE UNCOCKED
POSITION AS THE MAINSPRING WILL TAKE OVER AND FIRE THE TRAP, POTENTIALLY
CAUSING SERIOUS INJURY OR DEATH.
All personnel operating the trap should be thoroughly familiar with the operating
•
instructions and the safety issues relating to the trap.
Do not leave the rap in the cocked position. Accidental release of the throwing arm can
•
occur.
Keep hands and body away from the trap and throwing arm path while the trap is
•
operating.
Always disconnect the power or turn off trap when unattended, not in, use, or performing
•
maintenance.
Always check that others are safe before releasing the trap.
•
Always stay outside of the safety tube zone.
•
Never store the remote in pockets with the battery installed. Unintentional pressing of the
•
button will cause the trap to release.
Before working on the trap, ensure the battery is removed from the remote.
•
WARNING: THOROUGHLY READ
INSTRUCTIONS BEFORE INSTALLING OR
OPERATING THE WIRELESS REMOTE!
FAILURE TO FOLLOW SAFETY RULES
CAN RESULT IN SERIOUS INJURY OR
DEAT
Contents
Wireless Receiver (attach included antenna
•
to the top of the receiver).
Wireless Remote Transmitter
•
Adhesive "Hook & Loop" Mounting Pad
•
12 Volt Type A23 Battery for Transmitter
•
(Included, not shown)
Wireless
Receiver
54
Wireless
Remote
Transmitter
Advertisement
Table of Contents
