Table 11. Led Status - Run; Table 12. Led Status - Error - Parker P Series User Manual

LED status
Blinking
Single Flash
ON

Table 11. LED Status - RUN

 ERR LED
The ERR LED indicates the error status of the EtherCAT communication. The
following table outlines what each LED state indicates:
LED status
OFF Indicates normal state of the EtherCAT communication without any error.
Indicates that the drive has received a command from the EtherCAT master,
instructing it to perform a setting which is not feasible in the present state or
to perform an impossible state transition.
Blinking
A DC PLL Sync error occurred.
Single Flash
A Sync Manager Watchdog error occurred.
Double Flash
ON A servo alarm of the drive occurred.

Table 12. LED Status - Error

7-Segment for displaying state of servo consists of 5 digit and digit number starts
from the right.(Digit1Digit5)
DIGIT5 DIGIT4
First 3digit(DIGIT3~1) on 7-Segment indicate state of servo below when there is no
alarm. Warning will be displayed preferentially when warning occurs.
P series EtherCAT Drive User Guide
Parker Hannifin
The drive is in the Pre-Operational state.
The drive is in the Safe-Operational state.
The drive is in the Operational state.
DIGIT3 DIGIT2 DIGIT1
Details
Details
37