Table 9. Internal Resistor Setting - Parker P Series User Manual

3.6.1
This drive has a built-in regeneration brake corresponding to the drive power.
Specifications of internal regeneration brake for each drive power are as follows.
Drive Power
400W
1KW
3.5KW

Table 9. Internal Resistor Setting

To use the regeneration broke built in the drive, you should set the brake in the
following order.
A. Regeneration brake wiring
-
Check for B, BI terminal short (default short at the time of release from the
factory, 1kW or less)
Parker Hannifin
Internal Resistor Setting
Internal
Resistance
100Ω
40Ω
12.6Ω
P series EtherCAT Drive User Guide
Internal Resistance
Power
50W
100W
150W
32