Table of Contents
Advertisement
Incorrect! Distance not 180°
Correct!
• Repeat the mounting process for the rest of the tie bars (one couple of sensors per tie bar).
Before the start of your measurements, operate slowly the machine and
ensure that
- the sensors do not obstruct the normal operation of the machine�
- the integrity of the sensors is not compromised�
Mounting check via the Sensormate app - 2 Sensors on the Tie Bar
Once the placement of the sensors is complete on all of the desired tie bars, check if the mounting was correctly
done using the Sensormate app.
1.
Open the app and scan for nearby devices. Once
the QE2008-W Set is detected, connect to it and
wait for the status of the network to be "online"
Incorrect! External edges not aligned
Subject to technical modifications
17 / 56
Advertisement
Table of Contents
