Table of Contents
Advertisement
Device unique data
Note the device serial number, order code and type,
which are listed on the label, here:
• applied to the housing for the sensor
• applied on the case for the set
Should you need technical assistance, they must be
communicated to Gefran Customer Service.
Warnings and safety
Always make sure you have the latest manual version,
that can be freely downloaded from the Gefran website
(www.gefran.com).
The devices illustrated in the manual must be installed by
qualified technicians, following the laws and regulations
in effect and according to the instructions contained in
this manual.
Disposal
The QE2008-W must be disposed of in accordance with applicable regulations.
Some of the components used in the devices can cause damage to the environment if
incorrectly disposed.
Disclaimer
Although all information contained within this document
has been carefully checked, Gefran S.p.A. cannot be
held liable for the possible presence of errors, or damage
to persons or property due to improper use of this
manual.
Gefran S.p.A. also reserves the right to make changes
to the content and form of this document as well as the
characteristics of the illustrated devices at any time
without prior notice.
Copyright
This document and its annexes may be freely repro-
duced, provided that the contents are not modified in
any way and each copy includes this warning and the
statement of Gefran S.p.A. ownership.
Gefran and Sensormate are trademarks of Gefran S.p.A.
4 / 56
PREFACE
Serial No.
Order code
Installation and/or maintenance technicians must read
this manual and strictly follow the instructions herein and
found in the annexes since Gefran cannot be held liable
for personal, property and/or product damages should
the following conditions not be met.
The technical and performance data indicated in this
manual are to be considered as a guide for the user to
determine the suitability for a certain use, and are not
guarantees. They may be the result of Gefran S.p.A. test
conditions and the user must compare them to his/her
real application requirements.
Gefran S.p.A. cannot be held in any way liable for any
damage to persons or property resulting from QE2008-W
Sensor tampering, incorrect and improper use or other-
wise non compliant with instructions in this manual.
The document may mention or reproduce trademarks
and logos of third parties. Gefran S.p.A. acknowledges
the ownership of these trademarks or logos by their
respective owners.
Subject to technical modifications
QE2008-W
Advertisement
Table of Contents
