Table of Contents
Advertisement
5�3�
Creating a new network
Folow these steps to create a new QE2008-W network.
In the following example, a new network with the ID "NewNetwork" will be created. Note that an unassigned sensor
is required to create new networks. If needed, follow the section "5�1� Removing a QE2008-W sensor from a net-
work" on page 45 to create an unassigned sensor.
1.
If the Sensormate app has an active connection,
disconnect.
2.
Turn on an unassigned sensor that will be part of
the new network.
3.
On the Device List page, scan for BLE devices.
4.
Once the scan is over, a pop-up message will notify
of a discovered unassigned device. Select the
option "Create new network".
5.
Insert the desired Network ID for the new network
in the relative field and press Next.
6.
The app will now establish a connection with an
unassigned device.
Subject to technical modifications
49 / 56
Advertisement
Table of Contents
