Table of Contents
Advertisement
• When strain is selected as "unit", the average of all
the Tie Bar strain values is shown below the "Aver-
age" title.
• When instead one of the available forces is selected
as "unit", the sum of all the Tie Bar force values is
shown under the "Total" title.
• The unbalance indicator shows the maximum differ-
ence between the tie bars values and the average of
the tie bars values, and it's represented as percent-
age.
This value shows how load distributes among the tie
bars, signalizing the one with the highest deviation.
• A Tolerance value can be configured through the Set-
tings
settings
page. When the unbalance is measured and
found to be bigger than the configured tolerance, the
flawed tie bar and the unbalance value are highlight-
ed in blue. This communicates the user which tie bar
needs attention.
• A symbol next to the sensor name shows the status of
the sensor.
• Different commands can be executed through the
displayed buttons.
save_alt
RESET
Subject to technical modifications
The sensor is disconnected
The sensor is connected
and discharging
The sensor is connected
and charging
The sensor is defective
A snapshot of the measured
data is saved in a CSV file
Checks the proper mount-
ing of the sensors
Opens the unit selection
popup
Resets the sensors signal
to zero (Tare)
23 / 56
Advertisement
Table of Contents
