gefran SENSORMATE QE2008-W SET User Manual page 34

4�1�2�3� Pages details
Bending Measurement Page
• A cross-section of a tie bar with 4 QE2008-W sensors
is presented. The sensors are located around the tie
bar in steps of 90°, in accordance with the physical
mounting of the sensors.
• By default, sensors 1.1, 1.2, 2.1 and 2.2 are selected
for the bending measurement.
By tapping a sensor, its context menu opens. To
change the sensor, select the Change sensor
ton, swipe through the available sensors, and select
the desired one.
34 / 56

swap_hor
but-
Subject to technical modifications
swipe touch_ap