Table of Contents
Advertisement
These sensors are precision instruments with a resolution of 0.1με.
The devices must therefore be handled with great care. This instruction
manual must be read and observed by every user.
Warning! The installation of the devices described in the manual must be carried out by
qualified personnel, following the laws and regulations and in accordance with the
instructions contained in this manual.
Warning! Do not ever open the device.
Warning! Use extreme caution when installing and fixing the sensor unit.
If the sensor unit is installed at a height of more than 1.8 meters, all persons near the
sensors location must wear the protective helmet.
Before proceeding with the installation, check that the sensors are intact and have not been
damaged during transport. Also make sure that the package contains all accessories listed
in the documentation.
Warning! If even one of the above-mentioned requirements is not met, suspend installation
and contact your Gefran dealer or Gefran Customer Service.
2�1�
Sensor Handling and Installation
1.
Careful surface cleaning - Oil and other surface
contamination, or paint which has been applied,
must be removed at the site of installation.
2.
Check the foil on the sensor for signs of damage.
In case of damage, please refer to the Foil repla-
cement section or contact your Gefran dealer or
Gefran Customer Service
10 / 56
2� GENERAL HANDLING REQUIREMENT
Subject to technical modifications
Advertisement
Table of Contents
