Table of Contents
Advertisement
=
l
!
STEP
PROCEDURE
The following screens appear sequentially on the VFD:
\NOTE\
If the Registration is unsuccessful, an "F" will
appear on the VFD:
but the FM/AM-1200S will continue the Auto Test
with the programmed MIN.
4.
When the
screen appears and the handset's "No Service" callout or its
equivalent goes out, press the "SEND" button on the UUT to place
a call from the Mobile Unit to the Cell Site (the FM/AM-12005).
The following screens will then appear as the Auto Test continues:
If during programming:
was programmed, proceed with Step 5.
5 - 9 1
07
Advertisement
Table of Contents
