Rs-232 Commands For Tracking Generator - IFR FM/AM-1200A Operation Manual

5-11-5 RS-232 COMMANDS FOR TRACKING GENERATOR
RS-232 Command Definition Range of Values
DPL= Set Duplex Level HIGH, LOW
(Tracking
Generator
disabled)
DPL? Return Current Duplex Level HIGH, LOW, OFF
(OFF returned if
Tracking Generator
enabled)
TGL= Set Tracking Generator Level HIGH, MED, LOW
(Duplex disabled)
TGL= Return Current Tracking HIGH, MED, LOW, OFF
Generator Level (OFF Returned
if Duplex
enabled)
TGA= Enable/Disable Tracking ON, OFF
Generator Adjust.
(Tracking
Generator Level must be set.)
Note: Tracking Generator
Adjust must be disabled when
adjustments are complete.
TGA+
Tracking Generator Adjust
Positive (Tracking Generator
Adjust must be enabled)
TGA- Tracking Generator Adjust
Negative (Tracking Generator
Adjust must be enabled)
TGR
Reset Tracking Generator
Adjust Reference Number
Table 5-6 Tracking Generator RS-232 Commands
5-20
05