5-10-6
EXECUTING NATEL IN RECEIVE MODE WITH RF SET TO 123.4567 MHz
STEP
PROCEDURE
1.
2.
3.
Press:
I . .
PR.cc! --'r ... · · · •
[ - 1 [ - ] [
!A_P-~,!
. - _ _ ;
The VFD
indicat~s:
Press:
The VFD indicates:
Press:
The VFD indicates:
(Or other format, depending on last tone format programmed)
4.
Press:
,r.J.:IandlllliiJ\ keys until the YFD indicates:
~
~
5.
Press:
The VFD indicates:
rn==IIIN;==r:IRI
T = r = = ,
IL:;=;:IL
1==;=1--::::;==;1--lr=;=-+=;=-1-:;==;:1 I =;=I :::;=::;1 l==iillll
When a tone is received, the "- - - - -" will be replaced with
t~e
decoded tone sequence.
6.
Adjust squelch so frequency noise does not interfere with the
decoding process.
5-12
05
If an ''E'' appears on the VFD, the tone frequency
for that digit is invalid or out of tolerance
(±50Hz).