Five-Digit Signaling Format Operation - IFR FM/AM-1200A Operation Manual

' !
.
i
'
5-10 EUROPEAN SIGNALING (ENCODE/DECODE) - OPTION 11
5-10-1 GENERAL
With the FM/AM-1200S/A European Signaling Option (Option 11) intalled,
the operator can select any of the following Sequential Tone Formats:
CCIR ZVEI1 NATEL 2T
EEA ZVEI2 EURO
EIA ZVEI3 5/6
Once the desired tone format is selected, the user may edit, receive,
or generate the tone sequence. This option automatically handles
repeating digits so a repeat designator is not required for output.
5-10-2 FIVE DIGIT SIGNALING FORMAT OPERATION (INCLUDES CCIR, EEA, EIA,
ZVEI1, ZVEI2, ZVEI3, NATEL AND EURO)
This option to the FM/AM-1200S/A allows the operator to check pager
function using any of the above listed formats in either GENERATE or
RECEIVE Mode. There is no direct mode with this option. The user may
enter up to five digits when programming this format by utilizing the
following procedure:
STEP PROCEDURE
1. Program the format by pressing:
2.
3.
5-8
05
Use the
['.::t;_,-~- and~'-
cursor control keys to scroll through the
~
-
_ _Q_
c_
tone formats in the following sequence: CCIR, EEA, EIA, ZVEI1,
ZVEI2, ZVEI3, NATEL, EURO, 5/6, 2T (Two Tone). Use the:
I ._,
!
and I ._, . c u r s or con t r o 1 keys to move the c u r so r des i red p o s i t i on
uOJJ
~J
and the
~and!~
keys to increment and decrement the digits as
needed. Digits may be entered or edited regardless of the FM/AM-
1200S/A GENERATE/RECEIVE Mode.
To execute the tone sequence (in either GENERATE or RECEIVE
Mode), press:
:IY!fl
2"
I~J ~.
~
lllll!il
[iiiiiil]'
~STEP
FUNCT
~'
Paragraphs 5-10-3 thru 5-10-8 give examples of executing European
Signaling formats.