Table of Contents
Advertisement
The fields
shown are limited to the maximum values
indicated.
If a number higher than the maximum value
is entered. the field will show the maximum allowable
number;
i.e.,
if
"50"
is
entered
for
the
"GOTO
Channel", the maximum number of "31" will display.
15.
Press:
The following display will appear on the VFD:
16.
Press:
~~~
An open programming format for the repeater
simulation will appear on the VFD in the following configuration:
These
programming
bits are:
Border Offset -
(0,1 or 2
-
See NOTE Below )
Home Repeater
Number (1-20)
r
Home Repeater
Channel Numbe
( 1-600 with Bord
1-399 with Borde
er Offset 0 or 1,
r Offset 2)
umber (1-20)
Free Repeater N
Free Channel Nu mber
( 1-600 with Border Offset 0 or 1 ,
1-399 with Border Offset 2)
11101
I
101
I I
101
I
101
I I
101
Ill
I
A "2" entered as the "Border Offset" bit allows testing
of Trunking radio equipment utilizing the High Trunk-
ing Frequency Band (896 MHz to 935 MHz) in Tests 1. 2
and 3.
17.
Place Programming Template 2 over the FM/AM-1200$ front panel.
6103003
18.
~
~
Use
the~ and~
keys to move the cursor to the desired location
on the VFD and enter each digit of the data required.
5-5 9
08
Advertisement
Table of Contents
