Table of Contents
Advertisement
STU
PROCEDURE
5.
The mobile UUT will now begin to ring.
Complete the connect1on
by 1 ifting the mobile receiver or pressing the "SEND" button (or
equivalent) on the UUT.
If this phase is successful
If, during programming of the FM/AM-1200S,
was selected. go on to Step 6 from this point.
was selected, the following screen will appear
shortly after "MOBILE CONNECTED" is displayed:
!NOTEj
The SAT Frequency may be changed. the Power Levels
may be checked and
d
Manual Handoff Test may be per-
formed from the "HXXX PL-0 SAT-X" screen by using
the procedures outlined in Paragraph 5-14-3, Manual
Mobile-to-Cell Call Test. steps 5 through 9.
Fre-
quency Error and Meter readings, Manual SINAD Test,
Check DTMF Digits, Voice Deviation Check and Flash
Hook Test may al3o be made at this time by util iz-
ing the appropriate procedures; 5-14-4 thru 5-14·8.
jNOTEj
If any steps of procedures 5-14-3 thru 5·14-9 fail
to occur, the test has failed.
To retry. press:
5-79
06
Advertisement
Table of Contents
