Executing Repeat Tones - IFR FM/AM-1200A Operation Manual

i
!
.
j
'
STOP
4.
5.
PROCEDURE
Press
Jlllii
The FM/AM-12005/A is now programmed for ZVEI2 tone format with a
tone sequence of 12345. To generate a tone sequence, ensure the
FM/AM-12005/A is in GENERATE Mode (ref paragraph 4-6).
~~I.:W
Press:~~~
to execute the tone sequence.
5-10-4 Executing Repeat Tones
Using the procedure in paragraph 5-10-3 will generate the programmed
tone sequence once; it will not repeat itself. To restart the se-
quence, it must be executed again.
When repeating digits are found, however, the 'R' (Repeat) tone is gen-
erated. For example, if:
rn==;IIIL I==;=L II:::;===rlh'l==;=l =r==rl:l=;=tl2=r==rki-=T=JI =r==r=l I ==;=I =r=Till Ill
is programmed. the FM/AM-12005/A will generate '1R2R3'.
Repeat tones may be entered and generated in either or two methods:
5TE P
1 .
l:l~I.:W
Press:
t..;;J~~
PROCEDURE
r:::l
1-1
2. Press to move the cursor to the desired VFD digit and press
3.
4.
5-10
06
~~~or~~~
until the 'R' character appears at that cursor
location.
Alternatively, enter the
'R'
character by
the desired location in the tone sequence
The 'R' character will appear in that cursor location.
~~~
Press~~~
to execute the tone sequence. Where the 'R'
character appears, the repeat tone will be generated.