Omron FHV7H-C004-H19-MC Hardware Setup Manual page 167

4
Secure the terminal block connector (male) by tightening the screws on the right and left sides
of it with a flathead screwdriver. Recommended tightening torque: 0.5 to 0.6 N•m
4.7
5.08
Recommended Power Source for FH-L Series
The power source connected to the FH-L series Sensor Controller changes the power consumption
depending on the number of camera. Refer to the following table.
When you connect the camera using lighting Controller, the power consumption is same when connect
to the Intelligent Compact Digital Camera.
Item
Recommended
Power Source
S8VK-G
S8VS
FH Series Vision System Hardware Setup Manual (Z366-E1)
Terminal block connector (female)
Terminal block connector (male)
15.85
5.08
Camera type No. of camera
Intelligent Compact 2
Digital Camera
4
Camera of 2
0.3/2/4/5/12 million
pixels
4
(Unit: mm)
18.2
8.3
FH-L£££
S8VK-G12024
S8VS-09024
-
S8VK-G06024
S8VS-06024
-
5 Setup and Wiring
FH-L£££-££
S8VK-G12024
S8VS-09024
S8VK-G12024
S8VS-12024
S8VK-G06024
S8VS-06024
S8VK-G06024
S8VS-06024
5-13
5