Lighting And Lighting Controller - Omron FHV7H-C004-H19-MC Hardware Setup Manual

1 Confirm the Package
Touch Panel Monitor and Cables
Appear-
ance
Touch Panel Monitor 12.1 inches (for FH Sensor Controllers)
*1. FH Series Sensor Controllers version 5.32 or higher is required.
Appear-
ance
DVI-Analog Conversion Cable for Touch Panel Monitor
Cable length: 2 m, 5 m or 10 m
RS-232C Cable for Touch Panel Monitor
Cable length: 2 m, 5 m or 10 m
USB Cable for Touch Panel Monitor
Cable length: 2 m or 5 m
*1. Insert the cables length into £ in the model number as follows. 2 m = 2, 5 m = 5, 10 m = 10
*2. Insert the cables length into £££ in the model number as follows. 2 m = 200, 5 m = 500, 10 m = 010.
LCD Monitor and Cable
Appear-
ance
LCD Monitor 8.4 inches for Box-type Controllers
LCD Monitor Cable
When you connect a LCD Monitor FZ-M08 to FH sensor controller, please use
it in combination with a DVI-I -RGB Conversion Connector FH-VMRGB.
DVI-I -RGB Conversion Connector
*1. It can be used in FH series.
1-2-4

Lighting and Lighting Controller

Appear-
ance
External Lighting
-
Lighting Control-
ler (Required to
control external
lighting from a
Controller)
For the method of setting the lighting controller, please refer to the respective instruction manual.
1-8
Description
Description
Description
Description
-
-
For FLV-Series Camera Mount Lighting Controller
Analog Lighting Controller
For FL-Series Camera Mount Lighting Controller
FH Series Vision System Hardware Setup Manual (Z366-E1)
*1
*1
Model
FH-MT12
Model
*1
FH-VMDA £M
XW2Z-££
*2
£PP-1
*1
FH-VUAB £M
Model
FZ-M08
FZ-VM 2M
FZ-VM 5M
FH-VMRGB
Model
FLV Series
FL Series
FLV-TCC Series
FLV-ATC Series
FL-TCC Series