Electromagnetic Compatibility - EMS AIR-FLOW S2 Operation Instructions Manual

ELECTROMAGNETIC COMPATIBILITY

This product needs special precautions regarding electromagnetic compatibility and needs to
be installed and put into service according to the note "Electromagnetic compatibility".
Certain types of mobile telecommunication equipment could potentially interfere with this
product. The separation distances recommended in the note "Electromagnetic compatibility" must
be taken into account.
This product should not be used adjacent to or stacked with an other unit. If adjacent or stacked
use is necessary, this product should be observed to verify normal operation in the configuration in
which it will be used.
The use of accessories and cables other than those specified or sold by EMS as replacement
parts, may result in increased emissions or decreased immunity of this product.
70
FB-305_CN_rev_C_AFS2.indd 70 28/09/2018 14:43:46