Setting The Water Flow Rate - EMS AIR-FLOW S2 Operation Instructions Manual

PIEZON
®

Setting the water flow rate

1
The water flow rate is indicated in the operating instructions for Piezon
precise details on the correct settings for every instrument.
To avoid heat damage on the tooth, never work dry, unless the instrument is intended specifically
for this purpose. The tip of the instrument immediately heats up when used dry. For a sufficient cooling
of the tip of the instrument, it is important that a minimal quantity of water is available.
36
FB-305_CN_rev_C_AFS2.indd 36
systems which includes
®
28/09/2018 14:43:21