Table 3-6 Ptm Cable Cover - Compaq StorageWorks ESL9000 Series Installation Manual

Figure Legend Description
1 Screws
PTM cable cover
2
Screw
3
12. Reinstall the tape cartridge bins that were previously removed. Tighten
the screws to a torque value of 12 ± 1-in/lb.
13. Center the PTM between the tape library bin shelves as shown in Figure
3-7. The distance between the bin shelves and the PTM in the left tape
library 1 and the distance between the bin shelves and the PTM in the
right tape library 2 should be equal within 0.06 of an inch.
14. Tighten the screws that hold the PTM in place.
Table 3-6
PTM Cable Cover
Installing the PTM 3-9