Table 3-3 Screw Locations - Compaq StorageWorks ESL9000 Series Installation Manual

3-4 Compaq StorageWorks Pass-Through Mechanism Installation Guide
5. Install two screws (P/N 0905057) with washers (P/N 0685023) in the
locations shown in Figure 3-3, one in each tape library (second hole
from the bottom towards the bins). Do not fully tighten, leave
approximately 1/4-inch space in between the washer and the bin wall.
Figure 3-3. Screw locations
Figure Legend Description
1 Top chassis screw
2 Top chassis screw
1
Table 3-3
Screw Locations
2